Interesting Tech Projects
I just found a nice article on backlash and how anti-backlash nuts work – Backlash in Lead Screws: What It is and What to do About It.
| Print article | This entry was posted by Andy on June 18, 2008 at 9:14 am, and is filed under CNC. Follow any responses to this post through RSS 2.0. Both comments and pings are currently closed. |
Comments are closed.
Andy: I can't recall sorry - it's been too long.
mr. robo: You write
"Attach the Y axis to the core using a M8x220mm threader rod. A M8 nut goes into the nut...
Ryan: Thanks for this. I just ordered a dial indicator from Amazon for $15. It seems silly to buy a Drum...Andy: Your toaster oven is probably not suitable for doing this.
haimiko: Shouldn't the software be trying to follow the curve? My toaster oven is slow to heat up so the...
Dan: Hey Andy,
I used your script to get started. Very helpful.
Happy New Year!!!
Unnerby: Makes sense. Thanks a lot Andy !!Andy: I made the track width and length so it has the matching impedance required.